Skip to Content
Server Products Commerical Food Service Equipment
Main Content

A white bowl of soup with cubed bread garnish

Twin EZ-Topper | Pouched Topping Warmer

Model:EZTP/N:85920GTIN:687329041985List:$1,421.79 USD
Wish List How To Buy
  • Twin EZ-Topper? | Pouched Topping Warmer
  • 48 oz Caramel Pouch
Fast Facts

Low-profile EZ-Topper warmer serves Fudge and Caramel from 48-oz pouches with virtually no mess, product breakdown or waste and up to 98% evacuation.

Ideal For
  • Self-serve dessert stations; tamper-resistant packaging brings piece of mind
  • Lower-volume or sporadic use operations serving topping over extended periods of time
Certifications:
2YrWarranty
BPA-Free
NSF
UL
Supported Plug Types:
USA
Serving Application:
Hot

Warming and dispensing from a sealed pouch system allows you to serve a quality product from the first serving to the last. Pouched topping systems provide excellent evacuation, which increases the number of servings per bag. And an operational perk is the outside of the pump remains clean and dry - also reducing product waste and making cleanup much easier.

This Twin low-profile EZ-Topper™ is a great fit for operations serving a moderate amount of servings throughout the day or in a single daypart. This model dispenses warm Chocolate Fudge and Caramel from a 48-oz topping pouch with 16-mm fitment.

Dessert consistency is promoted with the portion control, stainless steel pump. It dispenses a 1-ounce serving per stroke and is adjustable in 1/8-ounce increments . Includes black knobs engraved Fudge and Caramel to incidcate topping flavors inside along with non-engraved versions.

Key Benefits
  • Up to 98% evacuation virtually eliminates product waste
  • Closed, sanitary system dispenses from 48 oz pouches with 16 mm fitment
  • Outside of pump remains clean using bagged product
  • 1 oz portion is adjustable in 1/8 oz increments
  • Radiant heat from the vessel warms the heater blocks to keep toppings warm during slow periods
Special Note

Contact your food distributor for special 48-ounce topping pouches with a 16-mm center fitment; currently packaged by:

  • Ghirardelli Chocolate Company
  • The Hershey Company
  • Lyons Magnus
  • Masterson Company
  • Specifications
  • Documentation
  • Videos
  • Trouble Shooting
GTIN687329041985
Height13 15/16" | 35.4 cm
Width11 7/8" | 30.2 cm
Depth9 5/8" | 24.4 cm
Weight23 lb
Dimensional Weight24 lb | 10.9 kg
International Dim Wt28 lb | 12.7 kg
Vessels2
Capacity(2) active
Dispense Typepump
Portionadjustable, 1/8 oz (3.7 mL) to 1 oz (30 mL) max
Volts120
Watts300
Amps2.5
PlugNEMA 5-15
Cord72" | 183 cm
C-UL-US ListedY
NSF ListedY

Brochures

Problem:

How do I stop this pump from dripping?

Solution:

To take care of this mess maker, check the seals and o-rings. If they look worn with tiny cracks or are misshapen, it's a good time for replacement.

Problem:

Why is my pump hard to push down for dispensing?

Solution:

This type of symptom was typically seen in Brazed Style (valve bodies) pumps manufactured prior to 1993. Well done on your pump maintenance, if yours is of that age. Our advice is to make sure the ball is resting on the inner valve assembly inside the cage. If that is correctly placed, also ensure the inner valve handle is on the catch.

Problem:

Why does my pump dispense only a little or no product (under dispense)?

Solution:

The next time your pump is apart for cleaning, check all seals and o-rings for wear or damage. Over time they develop tiny cracks and need to be replaced. Further investigation depends on what style (age) your pump is…

For a Cast Valve with Captured Balls (1999 to present)
Make sure the balls move freely when cleaning.

A Cast Valve with Loose Balls (1993 - 1999)
Make sure the balls are in the proper place; one in the inlet port of the valve body and the other in the discharge port.

For Brazed Valve Bodies (prior to 1993)
Make sure a ball is installed beneath the ball-retaining pin, the retaining pin is in place and a ball is resting on the inner valve assembly under the cage.

Problem:

Why is product oozing out around or under the locking collar?

Solution:

First make sure that the seal is firmly installed on the piston and stem assembly, with the flare side of the seal facing down. If the seal was installed properly, it likely needs replacing.

Problem:

Why isn't my pump returning to the top after dispensing?

Solution:

Known to insiders as a plunger problem, it's typically either a missing washer or a broken/missing spring.

The washer is necessary to compress the spring, so if it's missing, your plunger will not return. A well-used spring can become worn out or broken. The spring is also necessary for pump operation. Now you can call yourself an insider too.

Your pump Model and Part number are stamped on the lid. With that information, a parts breakdown will determine replacement part numbers.

Problem:

My unit stopped heating, turning on or is tripping the breaker. What could be wrong?

Solution:

Quickly double-check, is the outlet getting power? Do you have too many things plugged into the same outlet or circuit?
Check operation in another outlet.

Did the unit accidentally get wet or submerged?
Save yourself the freight fees and let it fully dry out before sending it in for repair. We have had units returned for repair and with a few days of dry time/transit they started working again.

Has any food waste come in contact with the thermostat?
This can cause the unit to stop heating.

Do you use the unit as a water-bath?
Using treated or softened water and air drying during non-use is a great way to extend the life of the water vessel; prevents water from leaking through a corroded pinhole onto the electrics within.

Is descaling part of your scheduled maintenance?
Over time, lime scale can build up on the unit and cause it to stop working.

* Server Products equipment is sold through dealers or distributors. The list prices shown throughout the site are for estimating cost.
The final cost may be lower or higher based on your location, taking into account taxes, landing fees, etc.